
ServicesUV Water Purification
UV Water Purification for Wyldwood Homes
Ultraviolet light treats every gallon that comes into your house, so bacteria and other microbes can no longer multiply. Nothing is added and the taste stays the same. We size the unit, fit it neatly, then return to teach you its upkeep.
What UV Does, and What It Leaves Alone
Inside a UV unit, water flows through a stainless chamber past a lamp sealed in a quartz sleeve. The light neutralizes 99.9% of bacteria as they pass, so they can no longer multiply or make anyone sick; the lamp needs only an annual change. There are no chemicals to add and no byproducts left behind.
UV is a disinfection step, not a filter. It does not remove lead, chlorine, iron, sediment or anything that affects taste or odor. That is why we almost always pair it with a sediment prefilter, and often with whole-home filtration or a reverse osmosis system, depending on what your water test shows.
It makes the most sense for homes on a private well, homes with a positive bacteria result, and families who simply want a quiet, chemical-free safeguard on the line. Around Wyldwood and nearby towns like Bastrop and Elgin, we start every UV conversation with a test so you only buy what your water needs.

What Your UV Installation Includes
- 01
A unit sized to your flow
Each gallon has to spend enough time in front of the lamp to take in a full dose of light. We match the chamber to your home's peak demand, counting bathrooms and fixtures, so several showers at once still get treated properly.
- 02
Sediment prefiltration
Cloudy or gritty water shadows microbes from the lamp. A prefilter, usually rated at 5 microns, keeps the water clear enough for UV to do its job.
- 03
Clean mounting and a bypass
We mount the system on a wall or bracket near your main line, with shutoff valves and a bypass loop. That lets you change a lamp or filter without draining your plumbing.
- 04
Disinfecting the lines after install
The lamp only treats water from the chamber onward, so any bacteria already settled in the plumbing past that point stay out of its reach. Once the unit is running, we disinfect those downstream lines so your home begins with a clean slate.
- 05
A follow-up visit and care walk-through
After the system has run for a while, we come back, check the lamp and sleeve, and show you each maintenance step in person.
Questions about UV Water Purification?
Call(512) 883-7067When a UV System Makes Sense
Bacteria showed up on a test
When lab results find total coliform or E. coli, disinfection addresses it head on. We also look for the probable source so the UV is not hiding a separate problem.
You rely on a private well
Heavy rain can let surface water into a well, and one clean result does not speak for every season. UV keeps protecting the water in between tests.
Boil-water notices keep coming
If these notices keep surprising your household, a UV unit treats water where it enters your house, no matter what happened further up the line.
A family member needs more protection
Infants, older parents and anyone with a weakened immune system often react more to microbes in water. That alone leads many families to add UV.
You prefer no chemicals
Some owners would rather not add chlorine to their water. UV treats it with light and otherwise leaves it untouched.
How a UV Job Runs
- 1
Free water test
We check bacteria, clarity, iron and hardness. Iron and hardness matter because both coat the quartz sleeve and dim the lamp, so they may need treating first.
- 2
Sizing and a written quote
We measure your flow needs, look at where the main line enters, and confirm there is a nearby outlet. You get a line-item quote by phone and in writing, with any pretreatment explained plainly.
- 3
Installation day
We shut off the water, protect the floor, and plumb in the prefilter, UV chamber, valves and bypass. After powering up and checking for leaks, we disinfect the lines and leave the area swept and tidy. Most homes go without running water for part of a morning or afternoon, not a full day.
- 4
Check-back and care lesson
We return to inspect the sleeve, confirm the lamp and alarm are working, and walk you through lamp changes, sleeve cleaning and prefilter swaps so each task feels routine.
What Sets the Cost of UV Treatment
Installation is free, so most of the price is the unit itself plus any pretreatment your water calls for. We walk through every line before you choose and never include parts you did not approve. Testing first keeps the unit the right size.
- How much water flows
- Bigger homes with more bathrooms need a larger chamber and brighter lamp so the dose stays strong when demand peaks.
- Treatment ahead of the UV
- Clear water low in minerals may need just a sediment prefilter. Heavy iron or hardness can mean iron removal or conditioning before the UV.
- Placement and power
- Open space by the main line with an outlet nearby is easiest. A cramped closet or no power close by takes longer.
- Other treatment at the same time
- Plenty of homes add carbon filtration for taste or reverse osmosis for drinking water during the same visit, and that shifts the total.
- Replacement parts
- Expect a new lamp each year, a sleeve now and then, and prefilter cartridges. You hear the upkeep cost of each before buying.
Questions About UV Purification
Will UV change how my water tastes or smells?
No. The light moves through the water without adding or removing anything, so tap water tastes just as it did. For chlorine taste or smell, a carbon stage from our whole-home filtration options handles it.
When does the lamp need to be replaced?
Roughly every year. A lamp still lights up well after its strength fades, so looking at it tells you nothing. Most units include a timer or alarm, and we show you how it works during the follow-up visit.
What if the power goes out?
Your taps still run, but the water is not disinfected until the lamp has power again. When electricity returns, run several faucets for a few minutes to flush the untreated water. Some owners also fit a valve that stops the flow if the lamp fails.
Is a water test really necessary first?
It is. Iron, hardness and cloudiness all block light from reaching the water, and UV alone cannot get past them. The test shows what pretreatment you need, and it costs nothing.
How is the quartz sleeve cleaned?
Turn off the water, open the bypass, pull out the sleeve and wipe it down with a gentle descaling solution. It only takes a few minutes, and we go through it with you once at our check-back so you know the routine.
Find Out if UV Fits Your Water
We will test your water at no charge, explain what it shows, and tell you honestly whether UV belongs in your home. If it does, we come back after the install to make sure it is running right.